Green Project J 5-27-2003

Update 7-12-2003 As of right now I am looking for ways to finish removing the undercoating and paint. I was hoping to get a local company to do this and then strip the body and other parts. They are completely booked. I will have to change my plans and try someone else.

Inner Rockers are in great shape used a air chisel to remove the outer Rocker.

Used a Prybar and a hammer to remove spot welds hanging on last part of outer Rocker.

Ground off raised welds with a angle grinder.

Like always the last bolt refused to come loose. I used a cut off wheel to cut a slot in the screw and then removed it with a BIG flat blade screwdriver.

Drivers side Rocker is even better shape. Spot welds came off easy

Outer Rockers are Swiss Cheese. I do have perfect Repo's to replace them.