Subject:   cutting rear wheel wells
Date:   Tue, June 15, 2004 5:08 pm

    Just wanted to drop you a line to show you how i made a tool to use to mark
the quarter panels for cutting wheel wells. i used a piece of 5/8 wood dowel,
welding rod and a marksalot. bend welding rod around dowel one time then
measure half the tire height you will be using and then bend other end of welding
rod around dowel 2 times (holds marksalot better) then hold wood dowel level and
centered in rear axle and draw arch. when doing other side measure down from
top of quarter panel to make sure they come out the same.
see pictures

Tracy V. Black
AKA bondojoker