Henry Alexander
Fiberglass Henry J body

Results of HenryJ Survey (212 total responses as of 27 Dec 2005)
Note:
     Not all respondents answered all questions so totals are not the same for all categories.

1.)Quarter Panels as integral part of body or removable.
        133 Integral
        79 Separate
2.)Trunk or no trunk option.
       141 Trunk
       71 No trunk option
3.)Radiused wheel well opening or stock option
       111 radiused
       101 stock
4.)Rolled pan or stock body lines
       141 Rolled pan
       71 Stock body line option
5.)Recessed firewall or stock option
       137 Recessed
       71 Stock option
6.)Would you be interested in this body
      197 Yes
      15 No

As a result of the survey our plans are as follows:

1.) The bodies will be available with the quarter panels molded as an integral part and will feature a rolled rear pan and operational trunk lid.
2.) Wheel wells will be available radiused or stock
3.) Firewall will be available recessed or stock

We will offer a body only version and a rolling chassis version.
Body only:
Doors and trunk mounted and hinged. The doors will be made from an inner and outer mold and the window frame and window glass track will be steel. All window seals are still available as reproductions.
                                  Cost: $10,500.00

A Rod and Race 1 piece front end will work with this body. Later on we plan to produce our own separate fenders and hoods but this will not happen till 2007 as current plans are.

Rolling Chassis (Gasser Kit):
Body as above with fabricated steel frame, 9 in. Ford rear axle housing including 31 spline axles, leaf springs and coil over shocks and traction bars, MAS 4 inch dropped tube axle with early Ford spindles and transverse mounted leaf spring. Motor mounts and transmission mounts for small block Chevy are included. (Approximate 15% setback). A new reversed Corvair steering box will be installed. A Rod and Race 1 piece tilt off front end will be installed.
                                 Cost: $18,500.00

     If we get orders for 6 cars we will proceed with the project. If you have ever wanted a HenryJ Gasser, Pro Street or Race car but were discouraged by the lack of a good car to start with now is your chance.


Call Henry Alexander at 419-663-6616 (days) 419-668-6095 (evenings)
or contact me by email at alexeng25@msn.com