Kurts Project
Date: 08/26/2011
Started out with a nice S-10 for a donor frame, 350 engine that will end being a 383 stroker.  Here's is the progress so far.

The first pic is the S10 stripped down
2nd, is frame and motor/trans
3rd, is body resting on frame to see how it will line up
4th, rear view
5th pic on her is just sitting in the garage
6th, is rear quarter put on to see where the rear tire lines up with the wheel well
7th stripped down frame, cut off all s10 body mounts and most cross members that stick up to high
8th, is test fitting the body on the frame, as you can see from this pic the floor and rockers are wasted as with most Henry J's