Henry J cars SOLD 3
All of these cars are sold or no longer available.
Last Update 12-22-2012
e-mail me at firstname.lastname@example.org.
Body all steel 1951 Henry J.
Motor 580ci Big M Dart block.
Certified 8.50 funny car cage fits 225lb 6ft driver. Built by Blackstone Chassis Works, Boise Idaho. Have all paper work.
Has 3 passes on new 32x13 Hoosier Tires
Theres just to much for me to list click the link to see the rest.
1951 Henry J
I bought the car 15 - 16 years ago. It has been in a garage for the last 40 years. Started a complete off the frame restoration. Click link to see more.
$5,500 OBO. I have over $7,000 in this car.
September 19, 2009
Henry-J running gear has 44K miles on it and the car was a driver. I also have a good dash with gauges and a radiator. I would like to see this stuff go to a good home.
1951 J For Sale
51 J solid except for rockers and needs some floor patches .
Sold with bill of sale only.
Date: Thu, September 20, 2007
1951 Henry J Pro Street
350 40 over approximatly 400-450 horsepower
Turbo 400 Trans. with shift kit & 3500 stall converter.
Ford 9" rear end with 350 gears.
29 x 18.5 Mickey Thompson Pro's.
And Plenty More
This car runs great and is just plain radical. I cannot go anywhere without people pointing, staring or taking pictures of it. My wife says its a beast of a hot rod! It is a daily driver with approximately 10.000 miles on the drivetrain. It does have some rock chips and a few little dings in the paint. No interior or carpet. Dodge neon front bucket seats. Homemade bench backseat.
Rogers Henry J Project
My Henry J is now completed. The new interior that is done.
This car is for sale $39,000
Henry J parts
My grandfather is selling Some parts. He also has some other parts to sell as well.
1951-54 Henry J Parts:
2 - Front Bumpers (Fair Condition)
1 - Tail light
3 - Quarter Panels (Good Condition)
1 - Quarter Panel (Poor Condition)
8 - Hub Caps (Good Condition)
2 - 4 Cylinder Motors
1 Box of various parts
Henry J For sale
What isn't on the car (trim etc.) is probably inside the car. I have a title. $1,100
Date: 23 Oct 2007,
Henry J pro street frame
Henry J pro street frame.Front rails are 27"in. wide for a stock
Mustang front end. Rear is 25in. wide for 18.5 tires. Frame is built
for 32in. ladder bars. Three crossmembers are tacked in place. Built
for 100in. wheel base car. It could be used for others cars. It made
out of 2'by 3" by 11 gauge steel. Asking $850.00 or best offer.
Date: June 17, 2005
'51 Henry J Gasser
Vintage drag racer for sale to be finished under contract by my shop to your specifications.
The price depends on how you want it finished. This car was prepared as a drag racer in the 60's.
I am currently in the process of doing rust repair and body work. I am about 60% through this process. The rust is being cut out, and steel panels are being formed to replace the damaged areas.
At this point the car could go in about any direction you choose, (vintage drag racer, pro-street, current NHRA race car, street rod) if you are seriously interested contact us now, as it is a work in progress, in the coming weeks the body work will be completed.
customers. Come on down to C&C lets build something together.
1953 HJ for sale body very solid hood fender's door's quarter's trunk lid they all have no rust in them. Needs floor work and rocker I have them in the box they go with the car. The car has clear title. Headlight's work tail light work, dome light work's. Has 350 engine and 350 tran's straight axle in front engine run's .
Henry J 1953. Ready to deal
HENRY J FOR SALE
51 HENRY J FOR SALE ALL STEEL, 99% RUST FREE, STRAIGHT AXLE, 2X3 FRONT FRAME, TUBBED WITH 4 LINK 9" NARROWED WITH 33-14-15 FIRESTONES ON 14X15s CENTERLINES REAR 15X3s ONFRONT. CAR IS IN PROJECT MODE, I HAVE THE GLASS OUT TO PREP TO PAINT . WAS BUILDING TO BE A STREET GASSER WITH EARLY HEMI AND TORQFLITE. THIS BODY COULD EVEN BE USED AS A SHOW CAR ( exterior sheet metal is that straight and clean )
1953 Henry J For Sale
I am selling a 1953 Henry J car for my father in law, it is a model 533 with 47,000 miles, it is 90% intact and has a rusty floor,
it runs but needs carb work, I am located in Abbotsford BC which is right across the border from Sumas Washington.
51 Henry J Prostreet
Here are pictures of my Henry J Project which unfortunitly I am selling for financial reasons. If anyone is interested they can see pictures at craigslist under the Kalamazoo Michigan listings. I have been interested in Henry J's since I was 14 and it took me 30 years to get one. I have over $3,000 in the frame alone.
1951 Henry J
For Sale $26900
383 stroker 514 hp.
4 speed .
Mustang rack disc and drum brakes.
Ford 9in strange axles .
All new custom interior. Frame boxed and powder coated. floor all Rino lined and Ins. Needs nothing
Two complete 6 Cylinder motors For Sale
The First one has 45000 original miles@ came out of a 52 Henry J Corsair Deluxe. Needs to be rebuilt $500.00 see pictures all parts not shown.
The Second motor is complete from carb to oil pan. Motor is complete including dist. and carb. turns over freely $700.00 see pictures.
One straight drive trans. (not over drive) out of 52 Henry J Corsair Deluxe with 45000 miles $150.00 see pictures
Tex Dean's Family is Selling Plenty of Henry J's and many parts
Lots of stuff sold but more to go.
Contact them to find out what they are currently.
For current cars and parts call:
Cristal Dean-Buchfink cell is 918-521-1435
Mom's home# 918-341-4813.
Tex has Passed on and has left us will plenty of memories. Oct 27 2010
Mike Shields - Henry J
Date: 11/21/2012 SOLD
A Diamond in the rough. 53 Henry J
Street Rod / rat rod gasser style
Too many things to list
Blood Sweat and Tears
Basically everything is new on the car. Motor, Tranny, 4:11 Posi third member, Front Discs. With the overdrive transmission/4:11 combination the car is scary fast low end and runs all day on the freeway 65 mph at 2400rpm, 180 deg and 60 lb. oil pressure. The motor is a 383 ZZ4 chevy crate motor making about 375 hp. It has less than 1000 miles on it. I've got about 35k in it. I'd like to get that back out. I know some people have asked about it. If someone is genuinely interested have them give me a
Feb 19 2008
"Godzilla II" 1951 Henry J
Selling my 51 Henry J. This car has never been out of my driveway...it is new and ready to rumble. All steel except for a fiberglass hood and scoop. I feel this car will safely run low 9's. It is a Big Block Chevy with a Dominator on top, worked 502 heads, H beam rods, MSD, gold rockers and stud girdle, fender-well headers.
Buy complete for $16,500 or as a roller for $9500 without all the engine and components, transmission and components and the 9" center section.
Ron "Godzilla" Nye